Looking for a 3TNV88 for a Wacker Neuson Dumper? We hold this engine in mechanical and in common rail, new surplus and rebuilt, and we build the core to match the 3001 tracked dumper it is going into. Send the data plate and we will confirm which one you need.
The Wacker Neuson Dumper 3001 is a tracked site dumper for restricted-access material handling on construction and landscaping sites, powered by the Yanmar 88 mm-bore 3-cylinder.
ENGINE SPECIFICATION. Three cylinder, four cycle, liquid cooled, vertical in-line. Direct injection, naturally aspirated. Bore and stroke 88 x 90 mm. Displacement 1.642 L (100.2 cu in). Around 36 hp at 3000 rpm at full speed, less in machines governed lower. Dry weight approximately 341 lb (154 kg). Rotation counterclockwise viewed from the flywheel end. Engine as fitted to this machine: 3TNV88. Production years: 2008-2018. Rated output in this machine: approximately approx. 36 hp.
WHAT WE FIT TO YOUR MACHINE.
The bellhousing, flywheel, oil pan, manifolds, pulleys, brackets and drive coupling on this machine are all external components. They bolt on and off, and they carry across from the engine you are replacing onto the correct core.
MECHANICAL OR COMMON RAIL - THIS IS THE ONE THING YOU MUST MATCH.
The Yanmar 3TNV88 comes in two fuel systems and they are not interchangeable. MECHANICAL INJECTION uses a mechanical pump and governor, with no ECU or sensors - this is what most machines in the field run, and it is our standard stock